-40%
FLUKE Y8101 AC Current Transformer (a.k.a. Current Clamp)
$ 52.27
- Description
- Size Guide
Description
This New AC Current Transformer (so called because it plugs into a DMM’s Current jack) is New/Old Stock, and is in perfect electrical condition and almost perfect cosmetically (see photos.) This Current Transformer/Clamp extends the AC Current measurement range of a DMM from a typical maximum of 20 Amps up to 150 Amps, without the need to break the circuit. All you need is the ability to clamp around a single circuit conductor. The DMM reads out in mAmps, where 1 mAmp = 1 Amp. For example, if the DMM reads 9.18 mAmps, the actual current is 9.18 Amps (see photo). Another advantage of a clamp device is that an over-current situation is far less likely to blow a DMM’s current fuse (these can be expensive). A few specifications follow:► Current Range: 2A to 150A
► Accuracy Spec’d. from 48 Hz to 1200 Hz
► Working Voltage: 300V ac rms max.
► Maximum Conductor Size: 7/16” (1.11 cm)
► Compatible with Shrouded and Unshrouded DMM jacks (note: the banana plugs are not shrouded.)
Bonus Token Thank You Gift Included!
The Photos are not Stock Photos, they are of the item you are buying.
The Fluke Y8101 is a great Addition to your DMM’s Measurement Capability.
Returns are accepted if the Y8101 is not as described or if it is defective.
Be sure to contact me if you have any questions.